Operation Manual

174
Symbols, error messages and troubleshooting
Symbol Meaning
9
You are in the settings.
10
Flag for a special result, e.g. obtained
from alternative site testing
11
You have turned on at least one alarm or
you are in the alarm clock setting.
Optical warning while the alarm sounds
for 20 seconds.
12
The beep tone ( 0n1 ) or Acoustic Mode
(
0n2 ) is set to on.
13
The test strip has drawn up enough blood
or control solution, and test is running.
14
When an average is displayed (from mem-
ory): the symbol is preceded by the num-
ber of days covered.
AC_CP_LCM_Manual_EN-UK final.indd 174_CP_LCM_Manual_EN-UK final.indd 174 20.6.2007 11:04:4220.6.2007 11:04:42