Technical information

Chapter 1: Understanding Your New System 12
Using ACCU-CHEK Aviva Test Strips
• Only use ACCU-CHEK Aviva test strips.
• Replace the code key and run a control test
every time you open a new box of test strips.
(See Chapter 2 “Control Testing.”)
• Keep the test strips in their original container.
• Close the container tightly right after you take a
test strip out. This helps keep the test strips dry.
• Use the test strip within three minutes after you
take it out of the container.
• Be sure to check the “Use by” date on the test
strip container. Do not use the test strips after
that date.
• Store the test strip container and your meter in a
cool dry place, such as a bedroom.
• Store the test strips at 36 to 90ºF. Do not freeze.
• Do not apply blood or control solution to the test
strip before you insert it into the meter.
▲
!
Do not store test strips in high heat and moisture areas (bathroom, kitchen, laundry room)!
Heat and moisture can damage your test strips.