Technical information

Chapter 3 27
Meter Setup
Using the Set Mode
By using the set mode, you can personalize your meter to suit your lifestyle. Here are the
features you can customize—
Time and Date - set the time and date
Beeper - select on or off
Alarm clock - select 0-4 times a day for a reminder to test
Hypo alarm - select on or off. If you choose on, choose the level of the alarm.
Using the set mode is easy. The has three functions for the set mode.
• With the meter on, press and hold to enter the set mode—about four seconds—until “set”
flashes on the display.
• Press and release to set the feature you have chosen.
• You can exit the set mode at any time by pressing and holding for about four seconds.
You see the flashing test strip symbol.