Instruction Manual

45
12. Touch the blood drop to the
front edge of the yellow
window of the test strip. Do
not put blood on top of the
test strip.
13. When you see flash, you
have enough blood in the test
strip.
14. The result appears on the
display. If you want to flag
your test result for a special
event, leave the test strip in
the meter. (See Chapter 3,
“Flagging Test Results.”)
Otherwise, discard the used
test strip.
WARNING
If mg/dL does not appear with the test result contact the ACCU-CHEK Customer Care Service Center
at 1-800-858-8072. Use of the wrong unit of measure may cause misinterpretation of your actual
blood glucose level, and may lead to incorrect treatment.