Instruction Manual

Changing the Lancet Drum

When you have used the sixth and last lancet, you should change the drum.

1. Take the cap o the lancing device by pulling it

straight o . It is not a twist cap. The easiest way

to do this is to place your thumb to the side of the

notch as seen in the illustration.

2. Hold the drum between your thumb and index

ﬁnger and pull it straight out of the lancing

device. Two red stripes are visible on the white

part, indicating that the drum has been used.

NOTE

• A used drum cannot be reinserted into the lancing device.

• If the ACCU‑CHEK Multiclix lancing device or drum is dropped on a hard surface, the lancets may stick

out slightly from the drum and could cause injury. If you drop a drum, always pick it up at the red‑

striped end and dispose in a sharps container.