Operation Manual

45
3
Time Cancelling the Bolus Result
When programming a Standard
bolus (the bolus amount blinks on
the screen)
j If you do not press any meter
buttons for approximately
20 seconds, the meter returns to
the Pump Run screen.
j Exit the BOLUS AMOUNT screen
and return to the STANDARD
BOLUS screen by pressing
. or by pressing < and x
simultaneously.
j Set the bolus amount to 0.0
units. Press
> to exit the BOLUS
AMOUNT screen.
A bolus is not delivered.
During the bolus delivery start
delay (Standard bolus icon is
blinking)
j Press
x or z. The meter beeps
and displays the pump warning
W8: BOLUS CANCELLED. Press
> twice to confirm and mute the
warning. The meter then returns
to the Pump Run screen.
A bolus is not delivered.
Cancelling a Standard Bolus
You may cancel a Standard bolus delivery.
51639_00048010156_C.indb 45 6/11/13 8:47 AM