User Manual

Setting the Time and Date

You may exit at any time when setting up the time and

date. The settings you have already made will be saved.

The time and date should be set

prior to testing if you plan to down-

load the results into software or if

you or your healthcare professional

plan to review your memory to

check when a test was done.

Introduction

Setting the time

and date

Follow these steps to set the time and

date on your meter.

Step Action

2 Press the On/Off and MEM

buttons at the same time until

Set appears,then release both

buttons.

You will see a screen like the

one below.Either the word On or

the word OFF will be flashing.

Setting Up Your Meter

Step Action

1 Press the On/Off button to

turn on the meter.

362-13701 AdvNonSAMa 9/13/02 8:20 AM Page 18