Owner's manual

Does the beeper have to
be turned on? No, it is
an optional feature.
Turning the beeper on or
off does not affect the
test results.
The Accu-Chek
Advantage meter is set
to beep when:
• A strip is inserted.
• Blood or control
solution is applied to
strip.
• A result is displayed.
• An error occurs
while testing.
• Buttons are pushed.
1. Turn meter ON.
2. Press ON/OFF and
MEM buttons at the
same time.The
beeper is now on.
3. Press ON/OFF button.
The Beeper is now
off.
4. To turn beeper back
on, simply press
ON/OFF button again.
5. Press ON/OFF and
MEM buttons at the
same time to leave
this function.
Setting the Beeper
20
Code--- or the test strip
symbol flashes.
“ON,”“set” and a bell
appear on the display.
“OFF,”“set” and a bell
appear on the display.
“ON,”“set” and a bell
appear on the display.
Getting Started
21
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 20