362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page a ACCU-CHEK ..27 ® 12 User’s Manual Las instrucciones en español están al reverso de este manual. BLOOD GLUCOSE MONITORING SYSTEM ® Throughout manual: all unmarked prints black Cover image is blend of PMS 287 and PMS 2935. Stripes are lighter blend of same colors. Text within cover image reverses to white. Use Photoshop Blends for the Front Cover. White wire-obinding. Cover - gloss varnish.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page b Table of Contents Welcome ........................................................................3 Where To Find Help........................................................5 About This Manual ........................................................6 Getting Started ............................................................11 About Your Meter ...........................................................13 About the Test Strip ..........................
62-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 2 Welcome Other Information ........................................................66 Using Accu-Chek Advantage Test Strips.........................66 About the Test Strip ...................................................67 Running a Test ...........................................................68 Proper Test Strip Appearance .....................................74 Running a Control Test ...............................................76 Memory.......
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 4 Where to Find Help Accu-Chek Customer CareSM is available to answer your questions 24 hours a day. We offer assistance in Spanish and many other languages! Call 1-800-858-8072.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 6 About This Manual This manual is set up into the following sections: Section Title Content 1 Getting Started Learn the system’s parts and features, install batteries, and code meter 2 Glucose Testing Page 11 Run blood glucose test and understand results 31 3 Quality Control Testing Run quality control tests and understand results 52 4 Other Information 6 Reference using Accu-Chek Advantage test strips, memory results, caring for your met
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 8 • Some pages in this manual have a single column that may contain text, a flow chart and/or pictures: Quality Control Testing What is Quality Control Testing? Quality control testing is done using glucose control solutions instead of blood. Checking your system with quality control solutions ensures that you are doing a test correctly and that your Accu-Chek Advantage system is working properly as well as giving you reliable results.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 10 Follow these 4 important steps before using the meter for the first time: 1. Learn the system’s parts and features 2. Install batteries 3. Code the meter 4. Run controls Getting Started Getting Started Throughout manual: all tab sections print solid PMS 287. Type on tabs reverses to white.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 12 About Your Accu-Chek® Advantage® System Getting Started About Your Meter 1 Front of Meter 1 Display— Shows blood glucose results, mes- sages and glucose results stored in memory. 2 On/Off Button— Press to turn meter ON or OFF. 2 3 MEM Button— Press to review up to 100 glu- 3 cose values in memory. 4 Test Strip Slot— Insert test strip here. 4 Back of Meter 5 5 Code Key— For coding your meter.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 14 1 Your Accu-Chek Advantage kit comes with Accu-Chek® Comfort Curve® test strips. Accu-Chek Comfort Curve test strips are easy to use, touchable, and require only a small drop of blood for accurate results. If you prefer, Accu-Chek® Advantage® test strips may also be used with the Accu-Chek Advantage meter. See page 66. 2 3 14 1. Silver Bars - Insert strip with silver bars up and toward meter. 2.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 16 Installing or Replacing the Batteries Use the Chek Strip when performing quality control checks on your meter. Insert this end into meter with “Chek” side up. Your meter is shipped with two 3-volt lithium batteries that need to be installed before testing. Battery life will vary depending on usage, so always keep spares on hand.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 18 Installing the Batteries 1. Slide battery cover from back of meter. ® Two 3 volt lithium cell batteries required For in Vitro Diagnostics Use Manufactured for: BOEHRINGER MANNHEIM CORPORATION Model No. 870 9115 Hague Road, Indianapolis, IN USA 46256 053998801-0393 8707004909 1-800-858-8072 Accu-Chek® Adv antage ® call 1-800-858-8072 Two 3 volt lithium cell batteries required Model No.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 20 Setting the Beeper 1. Turn meter ON. Code--- or the test strip symbol flashes. 2. Press ON/OFF and MEM buttons at the same time. The beeper is now on. “ON,” “set” and a bell appear on the display. 3. Press ON/OFF button. The Beeper is now off. “OFF,” “set” and a bell appear on the display. 4. To turn beeper back on, simply press ON/OFF button again. “ON,” “set” and a bell appear on the display. 5.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 22 Setting the Time and Date 1. Turn meter ON. Code or the test strip symbol flashes. 2. Press ON/OFF and MEM buttons at the same time. Bell and “ON” or “OFF” symbols flash. 3. Press MEM button. The hour display flashes. 4. Press and release ON/OFF button until the correct hour is displayed. 5. Press MEM button. The meter is unable to account for February 29 each leap year.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 24 Setting the Time and Date The month display flashes. 8. Press and release ON/OFF button until the correct month is displayed. 9. Press MEM button. The day display flashes. 10. Press and release ON/OFF button until the correct day is displayed. 11. Press MEM button. 12. To leave this function, press ON/OFF and MEM buttons at the same time. 24 Bell and “ON” or “OFF” symbols reappear.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 26 To ensure accuracy of your Accu-Chek Advantage system, Roche Diagnostics recommends changing your Code Key with each new box of Accu-Chek Comfort Curve test strips. Each Code Key provides your AccuChek Advantage meter with the specific information that your meter needs to accurately measure your blood sugar.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 28 Coding Your Meter ® Accu-Chek Advantage For questions, call 1-800-858-8072 Two 3 volt lithium cell batteries required For in Vitro Diagnostics Use Manufactured for: BOEHRINGER MANNHEIM CORPORATION Model No. 870 IN USA 46256 9115 Hague Road, Indianapolis, 053998801-0393 2. Insert new Code Key until it snaps into place. ® 8707004909 635 Remove old Code Key if one is installed. 3. Turn meter ON.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 30 Glucose Testing Gathering Supplies Ne w Touch Drop to EDGE ACCU-CHEK ® Comfort Curve™ Easy to use! Touch Drop to Edge Advantage Complete 10 A C C U- C H E K Co m fo r t C u r v e Advantage Complete 10 Te st Strips Test Strips ON / OFF MEM ACCU Ad C H EK vanta 30 31 ® ge ® Glucose Testing To begin testing, you will need the following items: • Accu-Chek Advantage meter • Accu-Chek Comfort Curve test strips (Cat. Nos.
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 32 Glucose Testing Getting a Good Drop of Blood Follow manufacturer’s instructions. 1. Prepare lancet device. Do not reuse disposable lancets. If you use an alcohol wipe, let your finger dry completely before testing. 3. Let arm hang down at side briefly to allow blood flow to fingertip. 4. Grasp finger near area to be pricked and squeeze for three seconds. 5. Keeping hand down, prick side of fingertip and squeeze gently until you get a drop of blood.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 34 Running a Test Running a Test with Accu-Chek Comfort Curve Test Strips 1.Turn meter ON. Co ON / OFF de: 6 35 Check that code number displayed matches code number on vial of test strips. MEM When the test strip symbol flashes, meter is ready to accept a test strip. Be sure to tightly replace vial cap after removing test strip. 3. Gently insert test strip (yellow window facing up) into test strip guide.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 36 Running a Test 5. Touch and hold the drop of blood to the edge of the strip. Bring the finger and the strip together in a way that is most comfortable for you. The blood will be drawn into the strip automatically. 36 Glucose Testing You may pick up the meter, turn the meter, or move the meter to the edge of the table in order to touch the edge of the strip to the blood drop resting on your finger.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 38 Running a Test 6. Hold your finger to the edge of the Comfort Curve until the yellow window is completely filled with blood. Do not place the blood drop on top of the yellow window. When blood is applied correctly to the strip, a box rotates on the display until measurement is completed. The blood glucose result is displayed. Your result is automatically recorded in the meter’s memory.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 40 Running a Test 7. Remove the test strip from meter and discard. When the test strip is removed, the test strip symbol flashes indicating the meter is ready to accept another strip. 8. If you are done testing, turn meter OFF. 40 Glucose Testing 9. Dispose of strip and lancet in a punctureproof container with a lid such as a coffee can.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 42 Running a Test Proper Test Strip Appearance Glucose Testing Correct Blood Application This strip has the correct amount of blood on it. Incorrect Blood Application Notice that the yellow window is not completely filled with blood. This strip has too little blood on it and may produce an error message or an inaccurate result.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 44 Glucose Testing Understanding Your Test Results What’s Normal? The normal fasting adult blood glucose range for a non-diabetic is 70 - 105 mg/dL1 . One or two hours after meals, normal blood glucose levels should be less than 140 mg/dL2. Your doctor will determine the range that is appropriate for you. Unusual Test Results AND...
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 46 Understanding Your Test Results AND... you also experience symptoms of low blood glucose: sweating, trembling, blurred vision, rapid heart beat, tingling or numbness around the mouth or fingertips, THEN... seek proper treatment immediately. you get a low blood glucose result or LO is displayed symptoms are absent, run a quality control check with your glucose control solutions and a new test strip. (See page 52, Quality Control Testing.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 48 Understanding Your Test Result AND... you also experience symptoms of high blood glucose: fatigue, increased appetite or thirst, frequent urination, blurred vision, headache or achiness, THEN... contact your doctor immediately. HI is displayed (blood glucose result is higher than the high end of the system’s reading range refer to your test strip package insert for more information.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 50 Understanding Your Test Results IF... mg/dL and error are displayed, AND... symptoms are absent, 51 Glucose Testing 50 THEN... run a quality control check with your glucose control solutions and a new test strip. (See page 52, Quality Control Testing). If the control result is within the acceptable range, review the proper testing procedure and repeat your blood glucose test with a new test strip.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 52 Quality Control Testing What is Quality Control Testing? Quality control testing is done using glucose control solutions instead of blood. Checking your system with quality control solutions ensures that you are doing a test correctly and that your Accu-Chek Advantage system is working properly as well as giving you reliable results. Gathering Supplies Note: The Accu-Chek Advantage Care Kit is packaged with one level of glucose control solution.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 54 Quality Control Testing Running a Control Test with Accu-Chek Comfort Curve Test Strips 1. Turn meter ON. Test strip symbol flashes. 2. Insert Chek Strip (“Chek” side up) into the meter. The meter quickly goes through a series of internal checks. This brief test allows you to make sure your meter is functioning properly. “OK” and “✔” should appear on the display.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 56 Quality Control Testing ON / OFF 3. Remove Chek Strip from meter. The test strip symbol flashes. “L1” and “✔” appear. 4. Open test strip vial and remove test strip. Be sure to tightly replace vial cap after removing test strip. 5. Gently insert test strip (yellow window facing up) into test strip guide. The test strip symbol stops flashing and a blood drop symbol appears.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 58 Quality Control Testing 6. Hold the control bottle horizontally with the tip pointed directly at the right-hand edge of the strip in line with the edge of the Comfort Curve. 7. Gently squeeze the bottle to form one small drop. A box rotates in the display until the measurement is complete. If the solution comes in contact with clothing, immediately rinse out with soap and water. 9. Replace cap of glucose control solution.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 60 Running a Test 10. Control result appears. If result is within the acceptable range, the result and “OK” flash. Continue with step 11. If result is not within the acceptable range, “error,” “✔” and the result flash. See Understanding Control Results on page 64 for more information. 60 The test strip symbol, “L2” and “✔” appear on the display. 61 Quality Control Testing 11. Remove test strip from meter and discard.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 62 Running a Test 12. To perform another control check using Level 2 glucose control solution, return to step 4 and follow the same steps again. Turn meter OFF when you are done with your quality control check.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 64 Understanding Your Quality Control Results The test strip vial label indicates the acceptable range for Low Level and High Level glucose control solutions. The result displayed on your meter should fall within the acceptable range for the level of solution you used. If the result is within the acceptable range: • You can feel confident that your test strips and meter are working correctly.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 66 Other Information Your Accu-Chek Advantage kit comes with Accu-Chek Comfort Curve test strips. If you prefer, Accu-Chek Advantage test strips may also be used with the Accu-Chek Advantage meter. Supplies • Accu-Chek Advantage Test Strips (Cat. Nos. 551, 553, 966, 336) • Accu-Chek Advantage Glucose Control Solutions (Cat. Nos.
2-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 68 Running a Test 1. Turn meter ON. Co ON / OFF de: 6 35 Check that code number displayed matches code number on vial of test strips. MEM When the test strip symbol flashes, meter is ready to accept a test strip. ON / OFF MEM ACCU-CHEK ® 2. Remove a new test strip from vial. Be sure to tightly replace vial cap after removing test strip. 3. Gently insert test strip (yellow window facing up) into test strip guide.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 70 Running a Test Other Information 4. Obtain a blood sample. Make sure you have an adequate drop of blood before you apply it to the test strip. 5. Touch drop of blood to the center of the yellow window. Do not smear blood with your finger on the target area. If any yellow mesh is still visible after you have applied the initial drop of blood, a second drop of blood may be applied to the target area within 15 seconds.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 72 Running a Test Your result is automatically recorded in the meter’s memory. 7. Remove test strip from meter and discard. 8. If you are done testing, turn meter OFF. 9. Dispose of lancet in a puncture-proof container with a lid, such as an empty coffee can. 72 73 Other Information 6. Blood glucose result is displayed.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 74 Other Information Running a Test Proper Test Strip Appearance Correct Blood Application This strip has the correct amount of blood on it. 74 Incorrect Blood Application Notice that the upper left corner is not covered with blood. This strip has too little blood on it and may produce an error message or an inaccurate result.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 76 Quality Control Testing Important: Use only Accu-Chek Advantage control solutions with Accu-Chek Advantage test strips. ON / OFF MEM ACCU-CHEK ® Advantage® ON / OFF 1. Turn meter ON. Test strip symbol flashes. 2 Insert Chek Strip (“Chek” side up) into the meter.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 78 Quality Control Testing Be sure to tightly replace vial cap after removing test strip. 5. Gently insert test strip (yellow window facing up) into test strip guide. The test strip symbol stops flashing and a blood drop symbol appears. 6. Apply one drop of Level 1 glucose control solution to the center of the yellow target area of the test strip. A box rotates in the display until the measurement is complete.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 80 Quality Control Testing If result is within the acceptable range, the result and “OK” flash. Continue with step 9. If result is not within the acceptable range, “error,” “✔” and the result flash. See Understanding Control Results on page 64 for more information. 9. Remove test strip from meter and discard. 80 The test strip symbol, “L2” and “✔” appear on the display. 81 Other Information 8. Control result appears.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 82 Quality Control Testing Memory Storing Results The Accu-Chek Advantage meter automatically stores 100 glucose results, letting you review them in order from the most recent to the oldest. If you have set the time/date feature, the time and date of the results are also displayed.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 84 Memory ON / OFF 1. Turn meter ON. MEM ACCU-CHEK ® Advantage® Test strip symbol flashes. 2. Press and hold the MEM button down. The order number (1-100) of the result is displayed. The most recent result is “mem 1.” 3. Release the MEM button. The result, date and time are displayed. 4. Press and release MEM button to see the remaining stored results. Stored results are displayed from the most recent to the oldest (mem 1, mem 2, mem 3...).
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 86 Storage and Handling Keep your meter free of dust. Protect it from extremes in temperature and humidity, and handle it with care. Avoid storing in areas such as the bathroom, kitchen, or laundry room. It is recommended to store the meter together with the test strips at temperatures between 30˚ and 86˚ F (2˚ and 30˚ C).
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 88 Other Informtion Troubleshooting Guide The following are display messages and error messages that may appear on the meter. If you are unable to resolve a concern, please call Accu-Chek Customer Care SM at 1-800-858-8072, 24 hours a day, 365 days a year. DISPLAY CAUSE CAUSE Result that appears in memory does not match the result seen on the screen at the time the test was performed or is outside the 10-600 mg/dL reading range.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 90 90 Other Information DISPLAY CAUSE CAUSE Blood glucose result is higher than the measuring range of your test strips. See Page 48. Blood glucose result is lower than the measuring range of your test strips. See Page 46. This is a normal display check that appears each time the meter is turned on. All functions and display elements are tested automatically for about 2 seconds. If a segment is missing from an 8, false readings could result.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 92 Other Information Do not make treatment decisions based on an error message. DISPLAY 92 CAUSE ACTION Code key is faulty or Code Key was removed while the meter was on. Turn meter OFF and reinsert Code Key. If this error display still appears, contact Accu-Chek Customer CareSM at 1-800-858-8072. Temperature is above or below the operating range of test strips (57˚-104˚ F or 14˚-40˚ C). The result you have obtained may not be accurate.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 94 94 Other Information DISPLAY CAUSE ACTION Battery is dead. Only memory results can be recalled. Change batteries. Blood glucose result may be extremely high and above the system’s reading range. See Page 48 immediately. Test strip may be damaged or test was not performed correctly. If this display appears before blood is placed on strip, remove test strip and reinsert.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 96 96 CAUSE ACTION Normally appears when batteries are removed or replaced. If this symbol disappears after approximately 30 seconds, you may continue with a test. If this symbol remains after 30 seconds, call Accu-Chek Customer CareSM at 1-800-858-8072. Loss of all results in memory. Turn meter OFF, then ON again. You will not be able to recall the results previously stored in memory although your meter will store any future test results.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 98 Please read the information packaged with your test strips regarding up-to-date product specifications and limitations. Weight 3 oz with batteries (80 gm) Power Supply Two 3-volt lithium coin cell batteries These alkaline batteries may be purchased in camera or electronics sections of department stores, drug stores, and electronics stores. Or, ask your pharmacist.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 100 Warranty The following supplies and accessories are available from your authorized Roche Diagnostics Diabetes Health Care Center, pharmacies or your medical/surgical supply dealer: Test Strips Accu-Chek® Comfort Curve® Test Strips Cat. Nos. 2030365, 2030373, 2030381, 2030420, 3000133, 3000141, 3000150 Accu-Chek® Advantage® Test Strips Cat. Nos. 553,966,787 Glucose Controls Accu-Chek® Comfort Curve™ Glucose Control Solutions Cat. Nos.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 102 Non-Warranty Service Policy Roche Diagnostics’ Non-Warranty Service Policy applies to meters if the above warranty has not become effective, has become inapplicable, or has expired. Roche Diagnostics will repair or replace at its option meters returned to it for a service charge (not to exceed $35). Replacement will be with like or similar product.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 104 Accu-Chek Advantage and Comfort Curve test strips are provided with a specifically matched Accu-Chek Advantage or Comfort Curve code key. These test strips and code keys are specifically manufactured for operation with the AccuChek Advantage meter. Use of other test strips with an unmatched code key or even with the matched code key supplied by another manufacturer may prevent or impair the proper function of the Accu-Chek Advantage system.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 106 MEM Button.............................................................12, 13 Memory.........................................................................83 ON/OFF Button.........................................................12, 13 Quality Control Checks...................................................52 References ..................................................................107 References 1. Tietz, N.W.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 108 This product is covered by U.S. Patent Nos. 4,999,632; 4,999,582; 4,963,814; 5,508,171; 5,352,351; 5,405,511; 5,438,271; 5,997,817; 5,288,636; 5,627,075; 4,891,319; 5,762,770 (when used with Accu-Chek™ Advantage® test strips); 5,053,199; Re. 36,268 (when used with Accu-Chek™ Comfort Curve® test strips); and 5,366,609. U.S. Patent No. 4,891,319 is licensed from Quadrant Holdings Cambridge Limited.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 109 ACCU-CHEK, ACCU-CHEK CUSTOMER CARE, ADVANTAGE, CHEMSTRIP, CHEK, COMFORT CURVE, and SOFTCLIX are trademarks of a member of the Roche Group. ACCU-CHEK, ACCU-CHEK CUSTOMER CARE, ADVANTAGE, CHEMSTRIP, CHEK, COMFORT CURVE, y SOFTCLIX son marcas de un miembro del Grupo Roche. Roche Diagnostics Corporation 9115 Hague Road, Indianapolis, IN 46256 INSIDE BACK COVER ©2001 Roche Diagnostics. All rights reserved.
