Operation Manual

씰 Hold the test strip so that the application area and arrows are

facing upwards. Gently push the test strip in the direction of the

arrows into the test strip slot

➃

of your Accu-Chek Active meter,

until you hear it click into place.

Inserting the test strip automatically puts the meter in Test Mode.

Please remember that your Accu-Chek Active meter automatically

turns off after about 1–2 minutes of non-use (i.e. when no button

is pressed). If this happens, remove the test strip and repeat the

procedure described above with a new test strip.

Now watch the display.

man_04493168001_02_EnUK.indd 85 1/12/2006, 11:29:11 ðì