Operation Manual

Each time you open a new pack of test strips, you will need to
insert the coding chip that came with that pack into your meter.
Coding chips from other packs contain the wrong information
for your new strips, so test results will be incorrect. Leave the
coding chip in the meter until you have used up all of the test
strips from a particular pack.
Check that the three-digit code (e.g.
133
) printed on the chip
matches the code printed on the label of the container the test strips
came in. When coding is complete, your Accu-Chek Active meter will
display the code number.
33
man_04493168001_02_EnUK.indd 33 1/12/2006, 11:28:53 ðì