Operation Manual

Setting the beep tone

After you have set the day and pressed the S button, you can either

enable or disable the beep tone.

씰 Press the M button to turn the beep tone on and off.

씰 Press the S button to complete the settings procedure.

Check that all the settings now shown on the display are correct.

Press the S button again to turn off your Accu-Chek Active meter.

If any of the settings are incorrect, you may repeat the settings

procedure (after turning the meter on again).

man_04493168001_02_EnUK.indd 31 1/12/2006, 11:28:53 ðì