Operation Manual

18
3.1 After opening the pack
Accu-Chek Active is sold complete with one lithium battery already
inserted. A plastic film protects the battery against becoming
drained prematurely. Before using the meter, remove the film
covering the battery.
The film is visible at the top of your Accu-Chek Active meter,
projecting from the battery compartment. Simply pull the film
directly away from the top of the meter.
This will open the battery compartment. Then you can remove
the protective film.
Slide the battery compartment back into the meter and press
gently inwards until it clicks into place.
3 Initial steps before testing
man_04493168001_02_EnUK.indd 18 1/12/2006, 11:28:50 ðì