Operation Manual

This error message means ...
The test strip has been inserted incorrectly.
Insert the strip, test pad upwards, in the direction
indicated by the arrows, until it snaps into place.
The wrong coding chip is inserted. This coding
chip does not belong to Glucose test strips from
the Glucotrend or Accu-Chek Active blood glucose
systems. Remove this coding chip, insert the
correct coding chip.
The coding chip cannot be read. Remove the chip
and re-insert it. If you again see the error message,
you cannot use the chip and pack of test strips.
117
8.3 Troubleshooting
man_04493168001_02_EnUK.indd 117 1/12/2006, 11:29:25 ðì