Operation Manual

A new battery provides enough power for about 1,000 tests.
When you first see the battery symbol displayed, there is still enough
power for about 50 tests, though we recommend that in this event
you replace the battery as soon as possible. By then the battery
will have been considerably drained, and changeable conditions
(cold surroundings) can affect its performance even further.
Insert a new battery into the meter as follows:
씰 Turn your Accu-Chek Active meter over.
씰 At the top you see the recess for opening the battery
compartment cover. Use your thumb to slide the cover out
of the meter.
씰 Within the cover is the circular chamber for the battery.
Four supports stop the battery falling out.
씰 Place the battery in the chamber with the “+” symbol facing
downwards. Apply gentle pressure on the battery until it is
properly located within the supports.
107
man_04493168001_02_EnUK.indd 107 1/12/2006, 11:29:23 ðì