User`s manual

48
For persons with vision loss – testing blood glucose
F
a
r
be
: P 2
8
1 – Pr
ü
fmi
tte
ln
u
mm
e
r: 2
05
2
7.2 Turning the voice unit on
 Turn the voice unit on by pressing the On/Off button and holding it down for at least 2
seconds.
 Then follow the instructions issued by the voice unit.
The voice unit instructs you to line up the two infrared windows and then to turn the meter
on.
i
If you cannot hear the voice unit’s announcement, turn the speaker volume up or
use an earpiece.
7.3 Lining up the infrared windows
 Lay the voice unit and meter down so they form an “L”
shape (see illustration).
When the meter and voice unit are in this position their two infra-
red windows are lined up, allowing the two devices to communi-
cate with one another.
Communication between the voice unit and meter may
be impaired or prevented altogether by extraneous
infrared signals (e.g. from a mobile phone, an insulin
pump or a laptop computer), or by exposure to direct sunlight. Make sure during communication that all unwanted
infrared sources are turned off and that no exposure to direct sunlight is possible.
AC_Voicemate_Manual_EN-CAN.indd 48AC_Voicemate_Manual_EN-CAN.indd 48 1.5.2007 13:16:011.5.2007 13:16:01