User`s manual

35
For persons with vision loss – testing blood glucose
2
 Insert a new test strip drum. Always make sure that the bar codes are inserted on top.
 Close the drum compartment cover and push it shut.
There will be an audible CLICK.
i
Ensure that the drum compartment cover is tightly closed. If it is not properly closed, you cannot turn the meter on by
pressing the Test button.
The meter turns on and rotates the drum until the first test strip is in the correct position. At the same time it reads the bar
code that provides the meter with information on the specific characteristics of the test strips. After that, the meter then turns
off.
AC_Voicemate_Manual_EN-CAN.indd 35AC_Voicemate_Manual_EN-CAN.indd 35 1.5.2007 13:15:531.5.2007 13:15:53