User`s manual
31
For persons with vision loss – testing blood glucose
2
If you wish the voice unit to speak another language:
Enter the number assigned to that language and press OK to confirm.
From that moment on the voice unit speaks the language you have chosen.
After you have selected the language, the voice unit asks you whether you wish to hear an explanation of the voice unit and
the keypad. If you answer “no” to this prompt, the voice unit turns off.
If you answer “yes”, the voice unit describes the keypad to you and then turns off.
Initial set-up is now complete.
i
If you make a mistake and choose the wrong language, you can change it as described below.
Turn the voice unit off and then on again.
Case 1: The voice unit does not speak the correct language and asks you to set the language.
Wait until you hear the announcement in the language you wish it to speak.
Enter the number you are told for that language and press OK to confirm.
From then on the voice unit speaks that language and asks whether you wish to hear an explanation of the voice unit
and the keypad.
AC_Voicemate_Manual_EN-CAN.indd 31AC_Voicemate_Manual_EN-CAN.indd 31 1.5.2007 13:15:511.5.2007 13:15:51