User`s manual

228
For sighted persons: Using the meter and cleaning the devices
F
a
r
be
: P 2
8
1 – Pr
ü
fmi
tte
ln
u
mm
e
r: 2
05
5
You now have about 5 minutes in which to apply blood. After this time, the meter automatically turns off.
3. Hold the meter so the test strip is pointing down-wards.
4. Hold the tip of the test strip to the drop of blood.
The test strip draws up the blood via the black notch.
When the test strip has drawn up sufficient blood, the meter beeps (provided the beep tone
is turned on), the test strip symbol disappears and the blood drop symbol stops flashing.
Measurement starts automatically and 000 appears in the display.
On completion of the test, the result appears in the display. The meter automatically saves
the result to memory.
5. Hold the meter over a waste bin with the test strip pointing downwards.
6. Press the Test button to turn the meter off. The used test strip drops out.
Carefully dispose of used lancets so they cannot cause injury.
AC_Voicemate_Manual_EN-CAN.indd 228AC_Voicemate_Manual_EN-CAN.indd 228 1.5.2007 13:17:511.5.2007 13:17:51