User`s manual

204
For sighted persons: Using the meter and cleaning the devices
F
a
r
be
: P 2
8
1 – Pr
ü
fmi
tte
ln
u
mm
e
r: 2
05
5
21.2 Display messages and troubleshooting
When elements in the display are surrounded by a halo, it indicates that they are flashing in the meter’s display.
If you receive frequent error messages, please contact the Accu-Chek customer care line (see Chapter 30).
If this happens ... it means:
The meter will not turn on.  The batteries (normal or rechargeable) are empty.
Insert batteries (new or recharged).
 You inserted the batteries the wrong way round. Remove the batteries and place them in
the battery compartment as instructed. If the batteries are left the wrong way round in the
meter for more than two minutes, the meter forgets the year, date and time. Re-enter
them (see Chapter 16).
 The surrounding temperature is below 0°C.
Change location. The temperature must be between +10°C and +40°C. Allow the meter to
warm up slowly.
 Condensation has affected the electronics.
Let the meter dry slowly.
 The meter is defective.
Please contact the Accu-Chek customer care line (see Chapter 30).
The meter is turned on, but
the display is blank.
The display is defective.
Please contact the Accu-Chek customer care line (see Chapter 30).
AC_Voicemate_Manual_EN-CAN.indd 204AC_Voicemate_Manual_EN-CAN.indd 204 1.5.2007 13:17:361.5.2007 13:17:36