User`s manual

180
For sighted persons: Using the meter and cleaning the devices
F
a
r
be
: P 2
8
1 – Pr
ü
fmi
tte
ln
u
mm
e
r: 2
05
5
You may also flag the result with the asterisk after the result is displayed and before you turn the meter off.
 Press the S button. The asterisk appears below the result.
To remove the asterisk:
 Press the S button twice (the first time you will see the bottle symbol for a quality control check, see Chapter 20).
Pressing the Test button to turn the meter off saves the result together with the asterisk.
18 Using the meter as an electronic notebook
18.1 Memory
Your meter has a 300-value memory for saving results together with time and date (provided you have set the time and date).
You do not need to save the results manually. The meter does it all for you. All results in memory are consecutively numbered
from 1 (most recent) to a maximum of 300 (oldest). If all the memory locations are occupied, the oldest result is erased, the
most recent result occupies memory location 1, and all the other results are shifted one place back in time. You cannot erase
results manually.
In addition to the result, the time and the date, your meter also saves all other information that is relevant to that test. For
example, results flagged as quality controls (see Chapter 20) are displayed together with the bottle symbol. Results obtained at
a temperature outside the permitted range are displayed with the thermometer symbol. Please refer to Chapter 21.1 for a
complete list of symbols that can appear in the display.
AC_Voicemate_Manual_EN-CAN.indd 180AC_Voicemate_Manual_EN-CAN.indd 180 1.5.2007 13:17:211.5.2007 13:17:21