User`s manual
176
For sighted persons: Using the meter and cleaning the devices
F
a
r
be
: P 2
8
1 β Pr
ΓΌ
fmi
tte
ln
u
mm
e
r: 2
05
5
Take care not to bend the test strip either before or during application of blood. Do not bend or move the test strip
while the test is in progress.
If you do bend or move the strip, it may produce an incorrect result, or you may
see the following message:
If this happens, press the Test button to turn the meter off and allow the test strip to drop
out. Repeat the blood glucose test with a new test strip.
17.4 Ejecting the test strip
ξ Hold the meter over a waste bin with the test strip pointing downwards.
ξ Press the Test button to turn the meter off. The used test strip drops out.
i
If you do not turn the meter off, it turns off automatically after approxi-
mately 60 seconds. The test strip then remains in the meter.
When you turn on a meter which still has a test strip inserted, it simply
ejects the strip and turns itself off again.
AC_Voicemate_Manual_EN-CAN.indd 176AC_Voicemate_Manual_EN-CAN.indd 176 1.5.2007 13:17:191.5.2007 13:17:19