User`s manual

167
For sighted persons: Using the meter and cleaning the devices
5
The Time 2 setting is followed by the Time 3 setting.
24-hour 12-hour
format format
 If you wish to set Time 3, proceed as described for Time 1.
The setting for Time 3 is followed by the hypo indicator setting.
 If you do not wish to enter a hypo indicator, press the Test button to turn the meter off.
The beep tone for the alarm clock function sounds for 20 seconds. To stop the beep tone press any button (Test, M or S).
Your test reminder time settings remain saved, even if you turn the alarm clock function off altogether (OFF).
You can turn off individual times for the alarm clock function by setting the time to 0:00 (24-hour format) or 12:00 a.m.
(12-hour format). Any other time means that the alarm clock function is turned on for this time.
To set the alarm clock function for midnight you must therefore set the time to one minute to midnight (23:59 or 11:59 p.m.)
or to one minute after midnight (0:01 or 12:01 a.m.).
AC_Voicemate_Manual_EN-CAN.indd 167AC_Voicemate_Manual_EN-CAN.indd 167 1.5.2007 13:17:131.5.2007 13:17:13