User`s manual

139
Error messages and troubleshooting
4
Message text Cause Remedy
While the voice unit and meter are in
contact with one another
Saved error message (Menu 5.1)
If you inserted the second or third
drum from a pack: Press the S button.
The meter uses the bar code from the
preceding drum.
If you inserted a test strip drum from
a single-drum pack, you cannot use
this drum. Insert a new drum.
Further information on this error
message is contained in the User’s
Manual in Chapter 21.
Meter error End:
Drum is empty.
The drum in the meter
is/was empty.
Press the Test button to turn the
meter off. Insert a new drum.
If you have not yet eliminated the
error:
Press the Test button to turn the
meter off. Insert a new drum.
Meter error EEE:
A meter error has
occurred.
There is/was a meter error. Turn the meter off and then on again
by pressing the test button. If the
error message persists, contact your
local customer support and service
centre.
If the error message is displayed/an-
nounced again when the meter turns
on, contact your local customer sup-
port and service centre.
AC_Voicemate_Manual_EN-CAN.indd 139AC_Voicemate_Manual_EN-CAN.indd 139 1.5.2007 13:16:561.5.2007 13:16:56