User`s manual

101
More functions of the voice unit and user guidance
3
To do this you must enter search criteria. You may enter search criteria for any entry except the personal memo. Searches for
personal memos are not possible.
All data sets meeting all of the specified search criteria are read aloud.
12.3.4.1 Search using existing search criteria (2-2-1)
If you previously entered search criteria in menu 2.2.2 “Change search criteria and search”, you can perform a new search
using the same search criteria. As a reminder, the voice unit reads the search criteria that are set.
 You can start the search at any time by pressing OK or the Right button.
All data sets matching all the search criteria are read aloud. These are so-called “hits”.
 In addition to these hits you can also have the neighbouring (i.e. adjacent in time) data sets read aloud. These do not
necessarily match the search criteria, however, i.e. they are not necessarily hits. Neighbouring data sets means the three
immediately older and three immediately newer data sets. This allows you to view hits together with adjacent data sets.
The first data set that is read aloud is the most recent hit. A long press on the Up button takes you to the immediately older hit.
Announcement of the hit is introduced by a beep tone. A renewed long press on the Up button takes you to the hit which is
immediately older than the previous one. Long presses on the Down button return you step by step to the most recent hit. The
announcement is introduced by the same beep tone.
When the oldest / newest hit has been reached, you will hear after the next button press: “No older hit found” / “No newer hit
found”.
AC_Voicemate_Manual_EN-CAN.indd 101AC_Voicemate_Manual_EN-CAN.indd 101 1.5.2007 13:16:341.5.2007 13:16:34