Technical data

Testing blood glucose

2 Take your ﬁnger away from the test area as soon

as Test in progress and the hourglass symbol

appear on the display.

The test area has then drawn up enough blood and a

beep sounds (if Beep tones is turned on). The hourglass

symbol indicates that the test is in progress.

Testing is complete after approx. 5 seconds. The result

appears on the display and the meter beeps (if Beep

tones is turned on). At the same time the meter auto-

matically saves the result. The used test area is trans-

ported away from the tip of the cassette.

If you want to ﬂag the result do not turn the meter off.

The procedure for ﬂagging results is described under

“Flagging results”.

If you do not wish to ﬂag the result you can now turn

off the meter (see next page).