Technical data

Getting to know your meter and ﬁnger pricker

Activating or deactivating functions

Some functions, e.g. the beep tones and ﬂagging

results, can only be activated or deactivated.

You can recognize these functions by the fact that

there is either a tick

or a checkbox in front of

them and the command above the

button is Off

or On (if there is a different command this means that

the function can also be modiﬁed).

A tick means that the function is activated. The

command for the

button is Off to allow you to

deactivate the function.

Press the

button (Off) to deactivate the activated

function.

A checkbox means that the function is deactivated.

The command for the

button is On to allow you

to activate the function.

Press the

button (On) to activate a deactivated

function.