Technical data

Performing a display check
179
Performing a display check9
If you wish to check whether the display is working
properly, you can also do this, in addition to after turn-
ing on the meter, via the display check in the Tools
menu. In this case, the display check is displayed not
only for about 2 seconds, but until you cancel it (but
not longer than 1 minute).
1 Turn on the meter with
,
 wait for the Main menu,
 use
to select Tools,
 press
to open Tools,
 use
to select Display check,
 press
to open Display check.
2 Press (OK).