Technical data

Using the meter a diary
151
Transferring results as a table
The CSV file always contains all the results saved in
your meter. Results already transferred at an earlier
date are transferred again.
The CSV file contains the following information:
Serial number:

the serial number of the meter
Download Date (DD.MM.YYYY), Download Time

(hh:mm): the date and time when the meter trans-
ferred the results to the computer.
Date (DD.MM.YYYY), time (hh:mm), result and unit of

the results saved in the meter.
Flags added to the results, indicated by an “X”.

In the CSV file, the date is always displayed in the
format DD.MM.YYYY and the time always in the
24-hour time format (hh:mm). The time format set in
the meter has no influence on the format of the date
and time in the CSV file.
The meter can transfer the results to a computer
without any special hardware or software. The only
prerequisite is that the computer has an infrared win-
dow according to the IrDA standard (Infrared Data
Association).
The results are transferred as a CSV file. CSV in this
case stands for Comma Separated Values as the indi-
vidual results are separated by semicolons.
CSV files can be opened with a text editor or spread-
sheet program, for example.
Where you find the CSV file on your computer depends
on the settings in your operating system for wireless
transmission of files via the infrared window.