Operation Manual

Show me how to put my meter in communication mode.

To prepare the meter for communication with the

, follow these steps:

If the meter is on, turn it off.

With the meter off, press and hold the two

arrow

buttons on the meter at the same time until the meter turns

on.

Select Data transfer

. Doing so puts the

meter in communication mode.

Plug in the USB cable:

❍

Make sure the larger end of the USB cable is securely inserted into a USB port on your computer.

❍

Make sure the smaller end of the USB cable is securely inserted into the port on the left side of the

meter.

Do not move the meter or the cable while the devices are communicating. You are now ready to use the

software to communicate information from the meter.

Note:

The meter can also be put into communication mode by plugging the USB cable into the computer if

Data

transfer

is selected as the default communication mode. Please refer to the user's manual that came with the

device for instructions on selecting the default communication mode.

Note:

The text associated with menu options may vary. The language displayed on the device may be different

than the language used by the

software.

ACCU

CHEK, ACCU

CHEK 360°, and ACCU

CHEK MOBILE are trademarks of Roche.

All other product names are property of their respective owners.

Download

( v1.4 )

Preparing the ACCU

-CHEK®

Mobile Meter for Communication

Version: 1.4