Operation Manual

Click on the desired blood sugar (bG) unit of measurement, as discussed with your healthcare provider. Your selection determines the display and/or
printout of your diabetes testing history.
Here are your choices:
● mg/dL is milligrams per deciliter
● mmol/L is millimoles per liter
Click NEXT to continue.
System Setup - bG Graph Range
System Setup - Target Defaults
bG Graph Range Screens
If you chose mg/dL on the previous screen, the following screen displays.
You must click one of the options to choose the correct blood sugar (bG)
graph range to display and/or print the results of your diabetes testing.
Here are your choices:
1. 0 - 400 mg/dL. If your diabetes test results are always below 400,
click this option. Graph results do not show anything higher than 400
mg/dL.
2. 0 - 600 mg/dL. If your diabetes test results are sometimes above 400,
click this option. Graph results show results up to 600 mg/dL.
Click NEXT to continue.
If you chose mmol/L on the previous screen, the following screen displays.
You must click one of the options to choose the desired blood sugar (bG)
graph range to display and/or print the results of your diabetes testing.
Here are your choices:
1. 0 - 25 mmol/L. If your diabetes test results are always below 25, click
this option. Graph results do not show anything higher than 25
mmol/L.
2. 0 - 35 mmol/L. If your diabetes test results are sometimes above 25,
click this option. Graph results show results up to 35 mmol/L.
Click NEXT to continue.
System Setup Wizard ( v1.1 )
System Setup Wizard
Version: 1.0
8