User's Manual

Installation Guide for the RF Module
This module has been authorized under FCC ID: HEDWG4005ACC
under mobile module approval category. The integrator of this module
has to be aware that this module can only be used in mobile host
equipment such as Access Point or Router.
The picture on left side is
a wireless router which
integrate this wireless
module.
The host equipment should provide an internal mini-pci interface for the
main board of this module. Also the housing of the host equipment should
provide a pair of antenna sockets for the installation of the diversity
antennas.
There are 3 pairs of antenna in this filing. The folded part of these
antennas has to be fixed with the housing of the host equipment, which
makes the end users impossible to remove the antenna unless destroy the
housing. The photo of these antennas are shown below, also the folded
part of each antenna type has been indicated.
Folded Parts