User's Manual
Table Of Contents
- Contents
- Preface
- Altitude 300-2TM Wireless Port Introduction
- HARDWARE INSTALLATION
- SPECIFICATIONS
- Maximum Distance Table
- Integrated Dual Band Antenna Pattern
- COMPLIANCES
- Power Over Ethernet Connector Pin Assignments
- Ethernet Connector Pin Number Assignment
BETA DRAFT
Altitude 300-2 Getting Started Guide 7
WARNING!
For safety it is recommended that two T-Bar fasteners be used to connect the Altitude 300-2
™
to a
hanging ceiling. Make sure that the fasteners are securely on the T-Bar before installing the universal
bracket and wireless port.
Figure 7: Installation On A Hanging Ceiling
The universal mounting bracket has mounting holes that allow it to be installed inline with the T-Bar as
shown in Figure 6 or at right angles to the T-Bar.
Some hanging ceilings have tiles with bottom surfaces that hang bellow the bottom of the T-Bar. For
these ceilings spacers are provided. The spacers go between the T-Bar fasteners and the universal
mounting bracket as shown in Figure 7.
Swing the arms
together to attach the
T-Barfastenertothe
T-Bar
Downward face of the
T-Bar
(A)
(B)
Mount the bracket on the
T-Bar fasteners and secure
it with the T-Bar nuts