User's Manual

BETA DRAFT
10 Altitude 300-2 Getting Started Guide
Altitude 300-2TM Wireless Port Introduction
Figure 4: Package Checklist
The Altitude 300-2
™
wireless port package includes:
• One Altitude 300-2
™
wireless port (Altitude 300-2i
™
or Altitude 300-2d
™
)
• One short Ethernet straight cable
• Altitude 300-2
™
Getting Started Manual
• One universal mounting bracket
• Two T-Bar ceiling fasteners and fastener nuts
• Two T-Bar fastener spacers
• Four #8x1 inch (25.4 mm) mounting screws and plastic anchors
• Four stick-on feet
• One cable tie to secure the Altitude 300-2O to the universal mounting bracket
• One 10-24 nut
The optional plastic cover kit not included here contains:
• Five Altitude 300-2
™
plastic covers (15482- translucent, 15483- cool gray, 15484- cream).
• Ten antenna shrouds for use with the Altitude 300-2i
™
.
• An installation guide sheet.
If possible, retain the carton, including the original packing materials. Use them again to repack the
product in case there is a need to return it.
Optional Equipment Not Supplied.
• One padlock for securing the Altitude 300-2
™
to the universal mounting bracket. The lock hasp is
compatible with a Master Lock 120T lock or a like model.
WARNING!
The Altitude 300-2
™
is not secured to the bracket unless a padlock is used. If a padlock is not used
the unit should be secured to the bracket by a cable tie through the lock hasp to keep it from falling.
Failure to secure the unit is hazardous.
• One computer lock cable for securing the Altitude 300-2
™
when the universal mounting bracket is
not used.
• Box hanger for installing the Altitude 300-2
™
above the tiles of a suspended ceiling.
• External antenna(s) for the Altitude 300-2d
™
. Extreme Networks' external antennas can be
ordered separately.
Software Description
The Altitude 300-2
™
receives its software and configuration from the Summit 300
™
switch. A description
of the software and the wireless port's configuration is in the Summit 300
™
manual.