User Manual
Table Of Contents
- Using the Nortel Networks Wireless LAN Access Point 2220/2221-802.11b-only
- This multi-product manual describes some features not available on the 2221-802.11b-only Access P...
- Preface
- Hardware Installation
- Network Configuration and Planning
- System Configuration
- Specifications
- Template for placing the Access Point 2220/2221
- Mounting the Access Point 2220/2221 on a Drop Ceiling
30 Chapter 3 System Configuration
214853-B
802.11b: Set the operating radio channel number (Default: channel 11)
Figure 7 Channel screen
IP Configuration
DHCP Client: With DHCP (Dynamic Host Configuration Protocol) Client
enabled, the IP address, subnet mask, default gateway, and DNS address can be
dynamically assigned to the access point by an external network DHCP server on
the network. This device implements a DHCP client but not a DHCP server.
(Default: Enable)
If DHCP Client is not enabled, you must enter the IP address, subnet mask,
default gateway, and one or more DNS (Domain Name Servers) addresses
(Figure 8).
Note: Available channel settings are limited by local regulations which
determine which channels are available (Figure 7).