User Manual
Table Of Contents
- Using the Nortel Networks Wireless LAN Access Point 2220/2221-802.11b-only
- This multi-product manual describes some features not available on the 2221-802.11b-only Access P...
- Preface
- Hardware Installation
- Network Configuration and Planning
- System Configuration
- Specifications
- Template for placing the Access Point 2220/2221
- Mounting the Access Point 2220/2221 on a Drop Ceiling
18 Preface
214853-B
System Requirements
Before you install the Access Point 2220/2221, be sure you can meet the
following requirements:
• An AC power outlet (100~240 V, 50~60 Hz) or an IEEE
802.3af-draft-compliant power source
• 802.11a or 802.11b compliant (or dual-compliant) wireless Ethernet adapters
with TCP/IP compatible protocol installed
• Web browser for configuration
Alternatively, you can connect an RS-232 cable to the console port and use the
command line interface (CLI). For more information on the CLI, refer to Run
Time Console Specifications.
Nortel Networks Optivity* NMS supports the Access Point 2220/2221.