User Manual
Table Of Contents
- Using the Nortel Networks Wireless LAN Access Point 2220/2221-802.11b-only
- This multi-product manual describes some features not available on the 2221-802.11b-only Access P...
- Preface
- Hardware Installation
- Network Configuration and Planning
- System Configuration
- Specifications
- Template for placing the Access Point 2220/2221
- Mounting the Access Point 2220/2221 on a Drop Ceiling
16 Preface
214853-B
Package Checklist
The Access Point 2220/2221 package includes:
• One Access Point 2220/2221
• Driver & Utility CD
• Documentation CD
Hardware Description
Ethernet Compatibility
The Access Point 2220/2221 can attach directly to 10BASE-T/100BASE-TX
(twisted-pair) Ethernet LAN segments. These segments must conform to the IEEE
802.3 specification.
The access point is an Ethernet node which switches packets from the remote
devices on the wireless infrastructure to the wired LAN and vice versa.
Power over Ethernet
The Access Point 2220/2221 supports Power over Ethernet (PoE).
To use PoE to power the Access Point 2220/2221, connect a 4-pair Cat 5 (or
better) cable to the RJ-45 port on the rear of the Access Point 2220/2221. Connect
the other end of the cable to an ethernet switch capable of delivering IEEE
802.3af-draft-compliant power.
The Access Point 2220/2221 draws 8.5 W. When using PoE, the Access Point
2220/2221 does not require the use of seperate AC power and the AC power
adapter should not be used.
LED Indicators
The Access Point 2220/2221 includes four status LED indicators, as described in
the following figure and table (Figure 1).