System information

Configuring the Switch
3-64
VDSL Line Configuration
Command Attributes
• Line – Select the VDSL line for configuration from the drop-down list.
• Local/Remote – In this version this may only be set to Local, indicating that the
line configuration applies to the line connection from the switch to the CPE.
• Coding – Specifies the VDSL coding type used on this line.
The types of code are:
1. Others (none of the following)
2. Multiple Carrier Modulation
3. Single Carrier Modulation
• Type – Defines the type of VDSL physical line by defining whether and how the
line is channelized.
The types of line are:
1. No channels exist
2. Only fast channels exist
3. Only interleaved channels exists
4. Either fast or interleaved channels exist
5. Both fast and interleaved channels exist
• Config Profile – In this version, only “DEFVAL” is displayed. In future versions,
a drop-down list of all configurable VDSL profiles will be in this field.
• Alarm Config Profile – The alarm profile is pre-configured to send trap
messages via SNMP protocol to register errors on the VDSL line.
Web Interface
Click VDSL, Line Configuration, select the line from the drop-down list, and click
Query.