System information

VDSL Commands
4-117
Examples
This example shows sample output from the show controllers efm status link
command
This example shows sample output from the show controllers efm status profile
command
Related Commands
show controllers efm interface-id actual
show controllers efm interface-id admin
show controllers efm remote ethernet mode
Use this command to display the connected CPE ethernet mode.
Syntax
show controllers efm remote ethernet mode interface-id
interface-id – ID of the VDSL port.
Default Setting
None
Command Mode
Privileged EXEC
Command Usage
To obtain the Ethernet mode from the CPE side VDSL chip
Examples
Console#show controllers efm status link Ethernet 1/1
Interface Link SNR (dB) RS Errs Interleaver
DS1 DS2 US1 US2 DS.M DS.I US.M US.I PBO
------------- ---- -------------------- -------- ------------------- ---
Ethernet 1/1 Up 45.0 35.0 46.0 44.0 0 16 8 8 8 on
Console#
Interface Link Uptime Profile Name DSRate USRate Fail
------------- ---- -------- -------------------- ------ ------ ----
Ethernet 1/1 Up 0:38:30 default 4.17 1.56 0
Ethernet 1/2 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/3 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/4 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/5 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/6 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/7 Down 0: 0: 0 default 0.00 0.00 0
Ethernet 1/8 Down 0: 0: 0 default 0.00 0.00 0
Console#show controllers efm remote ethernet mode ethernet 1/1
Interface Speed Duplex
------------- ---------- --------
Ethernet 1/1 100 Full
Console#