System information

Command Line Interface
4-106
Related Commands
efm profile global (4-103)
efm reset
Use the efm reset interface configuration command to reset the switch VDSL chipset
or, if a CPE is connected, the CPE VDSL chipset.
Syntax
efm reset {local | remote}
• local - Resets the CO side VDSL chipset for a VDSL port.
• remote - Resets the CPE side VDSL chipset of a VDSL port.
Default Setting
None
Command Mode
Interface Configuration
Command Usage
Use this command to troubleshoot VDSL port performance.
Example
The following example resets the CO side VDSL and CPE side VDSL chipset of
VDSL port 1
efm shutdown
Use this command to disable a VDSL interface. To enable a disabled interface, use
the no form.
Syntax
[no] efm shutdown
Default Setting
All interfaces are enabled.
Command Mode
Interface Configuration
Console#config
Console(config)#interface ethernet 1/1
Console(config-if)#efm reset local
Console(config-if)#efm reset remote
Console(config-if)#