System information

Command Line Interface
4-104
Default Setting
Default Profile
Command Mode
Global Configuration
Command Usage
Assigns the same profile to each VDSL switch port. Details of these profiles
are given in the table below.
Notes: 1. The VDSL Intelligent Switch uses Ethernet in the First Mile (EFM), a
VDSL-based technology.
2. A suffix of “A” in the profile name (e.g., S2-16-16A) indicate that this profile is
for both VDSL and ADSL lines in a bundle. Profiles without a suffix of “A” in
the profile name (e.g., S1-16-16) are for VDSL lines only.
3. The following profiles are recommended for use with this switch; S1-16-16,
S2-16-16A, A1-34-11, and- A2-34-11A.
Profile Name ProfileType Downstream Rate (Mbps) Upstream Rate (Mbps)
Default Public 1.20 1.40
A1-02OAG-R1 Public 7.56 2.43
A2-02OAG-R1 Public 10.80 2.43
A3-01OAG-R1 Public 17.28 3.78
A4-01OAG-R1 Public 25.92 4.72
S1-03OAG-R1 Public 7.56 7.56
S2-03OAG-R1 Public 10.80 10.40
S3-00OAG-R1 Public 17.28 16.47
S1-16-16 Private 16.74 16.20
S2-16-16A Private 16.74 16.20
A1-34-11 Private 33.75 11.34
A2-34-11A Private 33.75 11.34
A3-25-3 Private 25.38 3.24
A4-45-5 Private 44.55 5.13
A5-50-7 Private 50.47 7.29
A6-22-3A Private 22.55 3.24
A7-40-5A Private 40.91 5.13
A8-46-7A Private 46.44 7.29
TLAN Private 17.01 5.40
Max-Rate Private 71.28 40.50