System information

Class of Service Configuration
3-105
Click Priority, IP Port Priority. Select the port or trunk. To add an IP port, type the
port number in the IP Port box and the new CoS value in the Class of Service box,
then click Apply To delete an IP port setting, select the entry in the Current IP Port
Table, then click Remove IP Port.
CLI – The
following example shows IP Port 80 mapped to CoS value 0 for ethernet
port 1.
Console(config)#map ip port 4-153
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0 4-153
Console(config-if)#end
Console# show map ip port ethernet 1/5 4-155
TCP port mapping status: enabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 23 0
Eth 1/ 5 80 0
Eth 1/ 5 1020 6
Console#