System information

VLAN Configuration
3-93
Web – Click VLAN, 802.1Q VLAN, Port Configuration or VLAN Trunk Configuration.
Fill in the required settings for each interface, click Apply.
CLI – This example sets port 3 to accept only tagged frames, assigns PVID 3 as the
native VLAN ID, sets the GARP timers, and then sets the switchport mode to hybrid.
Console(config)#interface ethernet 1/3 4-86
Console(config-if)#switchport acceptable-frame-types tagged 4-138
Console(config-if)#switchport ingress-filtering 4-139
Console(config-if)#switchport native vlan 3 4-140
Console(config-if)#switchport mode hybrid 4-138
Console(config-if)#