Installation manual

Specifications C-1
Appendix C: Specifications
Product Specifications
Basic Criteria
Access Method
CSMA/CD, 10/100 Mbps (auto-sensed)
Standards Conformance IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX and 100BASE-FX
Communication Mode Full duplex or half duplex
Media Supported 10BASE-T Category 3,4,5 twisted-pair cable (100W)
100BASE-TX Category 5 twisted-pair cable (100
W)
100BASE-FX 50/125
mm or 62.5/125 mm guage
multimode fiber optic cable
Number of Ports 1 RJ-45 port (selects 100BASE-TX or 10BASE-T via auto-detection)
1 fiber optic port with SC or ST type jacks
Dimensions 273mm x 166mm x 43.6mm (10.75[ x 6.54[ x 1.72[)
Input Power Full range power input, 100 - 240 VAC (±10%), 50 - 60 Hz (±3Hz)
Power Consumption 0.3 Amp at 100 VAC, 0.2 Amp at 240 VAC
Temperature 0°C to 40°C (Standard Operating)
Humidity 5% to 95% (Noncondensing)
Certification CE Mark
Emissions FCC Class B, VCCI Class 2, CISPR Class B
Immunity IEC 801-2,3,4, EN60555-2 Class A, EN60555-3
Safety UL, CSA, TÜV/GS
Switching Criteria
Network Bridging Function
filtering, forwarding and learning
Maximum Filtering Rate at line speed
Maximum Forwarding Rate at line speed
Network Latency less than 20 microseconds
Address Table 4K entries per system
Queue Buffer 160K bytes/port