Installation guide

Description of Hardware
6
LED Indicators
The CPE includes seven LED status indicators on the top panel. The LEDs are
detailed in the following figure and table.
LED Color Description
PWR Green ON: Power is on.
OFF: Power is off.
OPT Green ON: Fiber link is up.
OFF: Fiber link down.
TEST Orange ON: Loopback test in progress.
OFF: No loopback test (normal mode).
PC Green ON: UTP port link is up.
OFF: UTP port link is down.
DATA Green ON/Flashing: UTP port is transmitting or receiving data.
OFF: No activity on the UTP port.
100M Green ON: UTP port is operating as 100BASE-TX.
OFF: UTP port is operating as 10BASE-T.
FULL Green ON: UTP port is operating in full-duplex mode.
OFF: UTP port is operating in half-duplex mode.