User Guide

SMCWPCI-N3 300Mbps Wireless N PCI Adapter
34
Chapter 6 WPS configuration
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC) or
PIN method.
First, the WPS software should be installed. Insert the installation CD into your CD-ROM drive,
and open the folder named SMCWPCI-N3. Double-click WPS.exe to start the installation, then the
following screen for preparing setup will appear.
Figure 6-1
Please follow the guide of the Operating System to complete the WPS installation. After that, WPS
function can be enabled. Here we will introduce how to configure the WPS in a SMC Wireless
Router as an example.
6.1 PBC (Push Button Configuration) method
1. First, press the WPS button directly on the front panel of the Router shown in Figure 6-2 .