User Guide

SMCWPCI-N3 300Mbps Wireless N PCI Adapter
32
Chapter 5 Configuration for Windows 7
SMC Wireless N Client Utility (SWCU) is not available for Windows 7. So after the Adapter's driver
has been installed, we have to use Windows WLAN Autoconfig to establish a connection. Please
follow the steps below.
1. Right-click the icon
at the bottom of your screen in your system tray and then you will see
the available wireless network list. Select the SSID of your Access Point, take test for
example. Click Connect.
Figure 5-1 Select a Network
2. If your wireless network is secured, you will be required to enter the security key as shown
in Figure 5-2. Enter the passphrase, take 1234567890 for example. And then click OK.