User Guide

SMCWPCI-N3 300Mbps Wireless N PCI Adapter
29
Chapter 4 Configuration for Windows Vista
SMC Wireless N Client Utility (SWCU) is not available for Windows Vista. So after the Adapter's
driver has been installed, we have to use Windows WLAN Autoconfig to establish a connection.
Please follow the steps below.
1. Right-click the icon
at the bottom of your screen in your system tray and then select
“Connect to a network”.
Figure 4-1
2. This page will then display and you will see the available wireless network list. Select the
SSID of your Access Point, take test for example. Click Connect.
Figure 4-2 Select a Network