User Guide

SMCWPCI-N3 300Mbps Wireless N PCI Adapter
26
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in Figure
3-3).
)
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the highest
priority and the same SSID as one of the found networks will be used to connect to the network. If
the connection fails, the client adapter will try the next highest priority profile that matches the
SSID until an available network is found.
3.3 Diagnostics
The Diagnostics tab of the SMCWPCI-N3 Wireless N Client Utility provides options used to
retrieve network traffic statistics. The Diagnostics tab does not require any configuration.
The Diagnostics tab lists the following receiving and transmitting diagnostics for frames received
or transmitted by the wireless network adapter:
¾ Multicast frames transmitted and received
¾ Broadcast frames transmitted and received
¾ Unicast frames transmitted and received
¾ Total bytes transmitted and received
Figure 3-13