User's Manual

Advanced Configuration
5-17
SNMP – Enables or disables SNMP management access and
also enables the access point to send SNMP traps (notifications).
SNMP management is enabled by default.
Location – A text string that describes the system location.
(Maximum length: 20 characters)
Contact – A text string that describes the system contact.
(Maximum length: 255 characters)
Community Name (Read Only) – Defines the SNMP community
access string that has read-only access. Authorized management
stations are only able to retrieve MIB objects. (Maximum length:
23 characters, case sensitive)
Community Name (Read/Write) – Defines the SNMP community
access string that has read/write access. Authorized
management stations are able to both retrieve and modify MIB
objects. (Maximum length: 23 characters, case sensitive)
Trap Destination IP Address – Specifies the recipient of SNMP
notifications. Enter the IP address or the host name. (Host Name:
1 to 20 characters)
Trap Destination Community Name – The community string sent
with the notification operation. (Maximum length: 23 characters)